PES-41 ™

PES-41 is our combination decontamination / bioremediation solution.

PES-41 can be used to remove hyrocarbons from pavement, railroad ballast and equipment. The product/oil mixture can then be allowed to run off as the bioremediation process begins immediately

 
Technical Details Application Instructions
PES-41 ™ is a proprietary blend of naturally occurring hydrocarbon-digesting microbes, an all-natural biosurfactant and an orange oil carrier. It is ideal for removing hydrocarbons from porous as well as non-porous surfaces. PES-41 ™ releases the oil from the surface and permits it to be flushed away. The PES-41 ™ microbes begin digesting the oil contaminants immediately.
 PES-41 ™ is normally applied to affected areas with a hand-held sprayer. The product should be allowed to soak for 3-5 minutes, and then rinsed with water from the pavement or other surface using a standard garden hose with a pressure nozzle. PES-41 ™ microbes immediately begin digesting hydrocarbons; continuing until only harmless carbon dioxide, water and fatty acids remain.
To apply:
• Thoroughly mix product. Do this prior to each use.
• Spray the affected area until wet.
• Wait 3-5 minutes. Breakup any excessive buildup with
wire brush.
DO NOT ALLOW PRODUCT TO EVAPORATE
• Pressure rinse with water.
Uses
Features/Benefits
  • Railroad Ballast
  • Contaminated pavement
  • Rocks/stones
 • Cleans and lifts oil off the contaminated surface.
• Digests the lifted oil (if washed to soil and maintained).
• Separates to the oil side of an oil/water separator system.
• Provides a “beading” protection to cleaned surfaces if used on a routine basis.
• Quality controlled and USDA screened by university
scientists.